|
 |
Neoprene Pads (pair) - Model 204
- The neoprene jaw pads slip over the ends of the model 201 PVJr. or 203 PV Jr. Head.
- Soft, gentle with plenty of holding power
|
|
 |
Extra Circuit Board Arms (pair) - Model 316
- Add extra arms for multi circuit board work to any PanaVise Circuit Board Holder.
- Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick.
- "V" notches postioned laterally near the arm tips securely and conveniently hold small electronic parts.
|
|
 |
Extra Width Circuit Board Cross Bars - Model 318-14 to Model 318-30
- Add a longer Circuit Board Cross Bars to any PanaVise Curcuit Board Holder to hold wider circuit boards or for multi circuit board work.
- These longer bars are availble in 4" (101.6mm) increments from 14" (355.6mm) to 30" (762mm).
|
|
 |
Circuit Board Holder Replacement Knob Set - Model 319
- Replacement Knob set for all Circuit Board Holder Arms.
|
|
 |
Nylon Jaws (pair) - Model 343
- The 343 Nylon jaws offer excellent electrical insulation and gentle holding power.
- Made of type 66 nylon.
- Will withstand intermittent heat to 300°F (149°C), or a continuous 200°F (93°C).
- Included standard on the 303 Standard Head.
|
|
 |
Grooved Nylon Jaws (pair) - Model 344
- The 344 Grooved Nylon jaws are similar to the 343 Nylon Jaws except that they have a small horizontal groove running the width of the jaws.
- Perfect for holding small tubes, rods, and small circuit boards firmly in place.
|
|
 |
Neoprene Jaw Pads (pair) - Model 346
- The reversible 346 Neoprene Jaw Pads are used with the 366 Wide Opening Head and the 376 Self-Centering Head.
- These thick, molded pads have a corrugated surface on one side to firmly hold the most delicate items.
- Flip the pads around and use the wide "V" to hold round objects.
|
|
 |
Telfon Jaws (pair) - Model 352
- The model 352 Teflon® High Heat jaws won't scratch or mar delicate pieces.
- Specifically designed for high heat environments up to 500°F (260°C).
|
|
 |
Plated Steel Jaws (pair) - Model 353
- The model 353 Plated Steel jaws are recommended when working with high heat or heavy objects.
- Included standard on the 304 Low-Profile Head.
|
|
 |
Brass Jaws (pair) - Model 354
- The model 354 Brass jaws are non-marring alternative to the 353 Steel Jaws for heavy or high heat applications.
- Prefect for Jewelry making.
|
|
 |
Wire Manager - Model 358
- The Wire Manager is a handy time-saver that helps organize your task when working with multiple wire leads.
- The tempered coil spring is also a convenient place to keep small tools close at hand.
- Pivots away from the jaws when not in use.
- Slides onto the end of a 366 Wide Opening Head or 376 Extra Wide Opening Head.
|
|
 |
Solder Station - Model 371
- The Solder Station is a combination soldering iron holder and controlled-feed holder for standard spools of solder and wire.
- Two nib sponges with self-purging slits are included.
- The station attaches to the 312 Tray Base Mount or to the 308 Weighted Base Mount. It may also be used as freestanding unit and is easily attached to a bench or wall.
|
|
 |
380-381 Vacuum Base Repair Kit - Model 380-RK
- Replacement for torn or damaged 380 Vacuum Base Pad.
- Includes rubber pad, handle and lockwasher.
|
